Stanley Hydraulic Tools
Cut–Off Saws
CO23 Cut-Off Saw
The Stanley CO23 Cut-Off Saw was designed for underwater use but it is also a very useful tool on land as well. The CO23 uses standard 10 inch (25.4 cm) diameter abrasive or wet or dry diamond blades for cutting metals or concrete.
Features & Benefits
- 10-15 gpm (38-57 lpm) operating range
- Adjustable depth shoe plate
- 3 inch (76.2 mm) deep maximum cut
- Wheel guard
- Integral HYREVZ™ gear-type motor
- Safety trigger
| Weight | 23 lb / 10 kg |
| Length | 19 in. / 50 cm |
| Width | 11 in. / 28 cm |
| Arbor Size | 1 in. (25.4 mm) |
| Rotation / RPM | CCW / 3300 |
CO25 Cut-Off Saw
The Stanley CO25 Cut-Off Saw is used for metal or concrete cutting. The CO25 uses standard 14 inch (355.6 mm) abrasive or wet or dry diamond blades. It comes standard with an internal blade brake and water attachment porting.
Features & Benefits
- 7-9 gpm (26-34 lpm) operating range.
- 4-3/4 iinch (120.6 mm) deep maximum cut
- Adjustable wheel guard
- HYREVZ™ gear-type motor
- Integral HYREVZ™ gear-type motor
- Flow regulator to prevent overspeed.
- Safety trigger
| Weight | 20 lb / 9 kg |
| Length | 21 in. / 53 cm |
| Width | 11 in. / 28 cm |
| Arbor Size | 1 in. (25.4 mm) |
| Rotation / RPM | CCW / 4500, CW / 4500 |
GR29 Underwater Grinder
The Stanley GR29 Grinder is used for top, face, and side grinding using 9 inch (228.6 mm) diameter wheels. Wire brushes can also be used and depressed-center wheels with an optional adapter.
Features & Benefits
- 4-10 gpm (15-38 lpm) operating range
- 2700 rpm @ 10 gpm (38 lpm)
- Adjustable wheel guard
- Integral HYREVZ™ gear–type motor
- Assist handle
| Weight | 14 lb / 6.4 kg |
| Length | 11 in. / 28 cm |
| Width | 12 in. / 30.5 cm |
| Arbor Size | 5/8 in - 11 Thd |
| Rotation / RPM | CCW / 2700 |
GR30 Grinder
The Stanley GR30 Grinder is used for top, face, and side grinding using 9 inch (228.6 mm) diameter wheels. Wire brushes can also be used and depressed-center wheels with an optional adapter.
Features & Benefits
- 7-9 gpm (26-34 lpm) operating range
- 5600 rpm @ 8 gpm (30 lpm)
- Adjustable Wheel Guard
- Integral HYREVZ™ gear-type motor
- Reverse-Check Valve
- Motor run-down
- Dual-Spool for operation on OC or CC systems
- Plastisol/foam handle
- Speed limiter
- Whip hoses and couplers
| Weight | 12.5 lb / 5.7 kg |
| Length | 8.5 in. / 21.6 cm |
| Width | 8.7 in. / 22.1 cm |
| Arbor Size | 5/8 in - 11 Thd |
| Rotation / RPM | CCW / 5600 |
GR60 Cupstone Grinder
The Stanley GR60 Cupstone Grinder is used for shaping and smoothing profiles using 6 inch (152.4 mm) cup wheels.
Features & Benefits
- 10 gpm (38 lpm) operating flow
- Integral shaft lock
- Interlocking safety trigger
- HYREVZ™ gear-type motor
- HTMA quick disconnect couplers
- Single latch guard height adjustment
| Weight | 20 lbs / 9 kg |
| Length | 18 in. / 46 cm |
| Width | 10.5 in. / 27 cm |
| Arbor Size | 5/8 in - 11 Thd |
| Rotation / RPM | CCW / 6000 |
HG60 Bull-Nose Grinder
The Stanley HG60 Bull-Nose Grinder is used for de-burring holes and grinding inside corners and curves.
Features & Benefits
- 5-10 gpm (19-38 lpm) operating range
- Interlocking safety trigger
- HYREVZ™ gear-type motor
- HTMA quick disconnect couplers
| Weight | 11 lbs / 5 kg |
| Length | 23 in. / 58 cm |
| Width | 3 in. / 8 cm |
| Arbor Size | 5/8 in - 11 Thd |
| Rotation / RPM | CCW / 4500 |
HG80 Horizontal Grinder
The Stanley HG80 Horizontal Grinder is used for surface touch-up of welds and de-burring using 8 inch (203 mm) wheels.
Features & Benefits
- 8-10 gpm (30-38 lpm) operating range
- Interlocking safety trigger
- Interlocking safety trigger
- HTMA quick disconnect couplers
| Weight | 14 lbs / 6.4 kg |
| Length | 23 in. / 58 cm |
| Width | 10 in. / 25 cm |
| Arbor Size | 5/8 in - 11 Thd |
| Rotation / RPM | CCW / 4500, CW / 4500 |