Stanley Hydraulic Tools
Drills
CD10 Core Drill
The Stanley CD10 Core Drill is used for drilling 5/8 in. to 6-3/8 in. (15 mm to 160 mm) diameter holes in concrete, masonry, or asphalt materials using carbide or diamond segmented bits and water lubrication.
Features & Benefits
- 5.8-13 gpm (22-50 lpm) operating range
- 3 speeds, 380, 900, and 1800 rpm
- Gardena quick connect water connection coupler
- HTMA quick disconnect couplers
- Drilling aid for freehand drilling assistance
- 1/2 x 5/8-11 in. thread adapter included
| Weight | 18.7 lb / 8.5 kg |
| Length | 19 in. / 48 cm |
| Width | 4 in. / 10 cm |
| Arbor Size | 1-1/4 in. UNC Male or 1/2 in. UNC Female |
| RPM | 380, 900, 1800 |
CD12 Core Drill
The Stanley CD12 Core Drill is used for drilling 5/8 in. to 12 in. (15 mm to 300 mm) or (5/8 in. to 14 in./15 mm to 356 mm) diameter holes in concrete, masonry, or asphalt materials using carbide or diamond segmented bits and water lubrication.
Features & Benefits
- 4-6 gpm (15-23 lpm) operating range
- 3 speeds, 380, 900, and 1800 rpm
- Gardena quick connect water connection coupler
- HTMA quick disconnect couplers
- Drilling aid for freehand drilling assistance
- Anchor stand, adjustable from 90° to 45°
- 1-1/4 UNC male, 1/2 UNC female spindle connection
- 1/2 x 5/8-11 in. thread adapter included
| Weight | 18.7 lb / 8.5 kg |
| Length | 19 in. / 48 cm |
| Width | 4 in. / 10 cm |
| Bit Cap. | 12 in. dia |
| Arbor Size | 1-1/4 in. UNC Male or 1/2 in. UNC Female |
| RPM | 380, 900, 1800 |
DL07 Drill
The Stanley DL07 Drill is a 1/2 inch capacity drill for drilling in wood, metal, or masonry.
Features & Benefits
- 12 gpm (45 lpm) maximum operating range
- 1/2 in. keyed JacobsŪ Chuck
- Assist handle
- Integral HYREVZ™ gear-type motor
- Reversable
- Open Center or Closed Center operation
| Weight | 6 lb / 2.7 kg |
| Length | 9 in. / 23 cm |
| Width | 4 in. / 10 cm |
| Chuck Size | 1/2 in. (13mm), 5/8 in (17 mm) |
| Other Features | OC/CC - A-C, OC/CC - A-C-CE, OC/CC - B-C-U/W |
HD08 Hammer Drill
The Stanley HD08 Hammer Drill is a rotary, percussion tool for drilling in rock, concrete, or masonry using 1/4 to 1 inch SDS Plus type bits. The HD08 can also be used for drilling in wood or steel by turning percussion off and installing an optional chuck adapter.
Features & Benefits
- 3-9 gpm (11-34 lpm) operating range
- Percussion ON/OFF control
- Assist handle
- Depth Gauge
- Flow control to prevent overspeed
| Weight | 6 lb / 2.7 kg |
| Length | 13 in. / 35 cm |
| Width | 5.5 in. / 14 cm |
| Chuck Size | SDS Plus |
| RPM | 1175 @ 6gpm |
SK47 Sinker Drill
The Stanley SK47 Sinker Drill is a rotary, percussion tool for drilling in rock or concrete using 7/8 inch hex, up to 2-inch diameter, drill steel. The SK47 can drill a 2-inch hole, 10 feet deep. The SK47 uses air to extract chips from the hole.
Features & Benefits
- 7-9 gpm (26-34 lpm) operating range
- Feathering ON/OFF trigger
- Adjustable rotation speed up to 300 rpm
- Hose whips
- Nitrogen charged accumulator
- Air connection
| Weight | 67 lbs / 30 kg |
| Length | 26 in. / 66 cm |
| Width | 18 in. / 46 cm |
| Shank Size | 1 in. hex x 4-1/4 in., 7/8 in. hex x 4-1/4 |
| Air/water Required | 30 cfm @ 120 psi, 1-3 gpm @ 30 psi, 30 cfm @ 120 psi, 1-3 gpm @ 30 psi |