Stanley Hydraulic Tools

Drivers and Pullers

image of an Earth Auger
download pdf

EA08 Earth Auger

The Stanley EA08 Earth Auger is used for a wide variety of earth boring appliction. The EA08 can be operated with two people or by one person using the torque tube.

Features & Benefits
  • 7-9 gpm (26-34 lpm) operating range
  • Output torque 250 ft. lb. / 339 Nm
  • Reversable
  • HTMA quick disconnect couplers
  • Torque tube for one-man operation
  • Dead-man type ON/OFF control
Weight 47 lb / 21 kg
Length 11 in. / 30 cm
Width 46 in. / 117 cm
Auger Size Up to 18 in. dia., 42 in. long - 15 in. extensions
Auger Connection 1-1/4 in. square fem 1-3/8 in. hex male
image of a Ground Driver
download pdf

GD50 Ground Rod Driver

The Stanley GD50 Ground Rod Drivers drive 1/2 to 1 inch rod from the top of the rod. A valve, in-line on the hoses, permits control of the GD50 while it is slung to the top of the rod.

Features & Benefits
  • 5-9 gpm (19-34 lpm) operating range
  • In-line valve on hoses for ON/OFF control
  • Assist handles
  • Lifting eye
  • HTMA quick disconnect couplers
Weight 52 lb / 24 kg
Length 25 in. / 65 cm
Width 16 in. / 41 cm
Rod Size 1/2-5/8 in. dia, 3/4-1 in. dia
Other Features in-line valve & hoses
image of a Post Driver
download pdf

PD45 Post Driver

The Stanley PD45 Post Driver will drive #2, #3, & #4 lb/ft "U" channel, #3 & #4 Strong Back "U" channel, #1 delineator, up to 2-5/8 inch round, or up to 2-1/2 inch square posts.

Features & Benefits
  • 7-9 gpm (26-34 lpm) operating flow
  • Lifting eye
  • On/Off trigger next to guide handle (model dependent)
  • Hose Whips
  • Nitrogen charged accumulator
  • Guide handles
Weight 65 lbs / 29 kg
Length 30 in. / 76 cm
Width 10 in. / 25 cm
Other Features In-line valve, hose, couplers ON/OFF trigger handle ON/OFF trigger handle, extended anvil for driving posts withing 4 inches of ground
image of a Post Driver
download pdf

PP10 Post Puller

The Stanley PP10 Post Puller is the ideal tool for pulling any type of post up to 8 inches wide.

Features & Benefits
  • 3-9 gpm (11-34 lpm) operating range
  • 9800 lb pulling force
  • Carrying handle
  • UP/NEUTRAL/DOWN control valve
  • Built-in grips for "U" channel posts
  • Chain & pins for irregular & perforated posts
Weight 70 lbs / 32 kg
Length 13 in. / 32 cm
Width 14 in. / 36 cm
Capacity up to 8 in. wide post
Other Features HTMA Couplers