Power Units - Stanley Hydraulic Tools

GT18 Hydraulic Power Units

GT18 Power Units are small and compact featuring a single 5 or 8 gpm (20 or 30 lpm) tool circuit.

Features & Benefits

Designed to meet HTMA standards
Briggs Vanguard or Honda OHV engines
Air-to-oil cooler with high-speed blower
Automatic throttling when tool is engaged
HTMA quick disconnect couplers standard
Lift and latch handle
Sealed, non-spillable, no maintenance battery
12 inch Foam filled tires
Low oil pressure shutoff
In-tank hydraulic filter
Electric start and all-electric controls
110 vac on some models
12 vdc plug on some models
Hose basket (included on some models optional on other models)

Weight	330 lb / 150 kg
Length	35 in. / 90 cm
Width	21.5 in. /54.6 cm
Height	29 in. / 74 cm
Output	5 or 8 gpm / 20 or 30 lpm
Engine	Briggs, Honda
110 vac/12 vdc Accessory Plug	Optional* 110vac, 110vac/12vdc, Optional* 12vdc
Auto Throttle	Yes
Hose Basket	Optional

download pdf

HPR Hydraulic Power Units

HPR Power Units are small and compact and feature either one 5 or 10 gpm (20 or 38 lpm) tool circuit or a twin 5 gpm (20 lpm) tool circuit combinable to a single 10 gpm (38 lpm) circuit.

Features & Benefits

Designed to meet HTMA standards
Briggs Vanguard or Honda OHV engines
Air-to-oil cooler with high-speed blower
Automatic throttling when tool is engaged
HTMA quick disconnect couplers standard
Wheel barrow and side handles
12 inch Foam filled tires
Low oil pressure shutoff
In-tank hydraulic filter
Electric start
Hose Basket

Weight	286 lb /130 kg, 271 lb /123 kg, 261 lb /118 kg
Length	35 in. / 90 cm
Width	23 in. / 59 cm
Height	29 in. / 74 cm, 23.5 in. / 60 cm
Output	5 or 10gpm / 20 or 38 lpm, 2x5 gpm / 2x20 lpm
Engine	Briggs, Honda
Wheels & Handles	Available on some models
Auto Throttle	Available on some models
Hose Basket	Optional

download pdf

HV18 Hydraulic Converter

The HV18 Hydraulic Converter is a portable hydraulic system that gets its power from the hydraulic system of a skidsteer loader, backhoe or any hydraulic source that can produce a minimum of 13 gpm (49 lpm) @ 2000-3000 psi (138-206 bar). The Converter then provides controlled and clean power to the tool with oil cooling. The HV18 Converter contains some of the hardware and design features of our "state-of-the-art" power units without the engine.

Features & Benefits

Designed to meet HTMA standards
Air-to-oil cooler with high-speed blower
HTMA quick disconnect couplers standard
Hydraulic reservoir for tool operation
In-tank hydraulic filter
Carry type frame

Weight	100 lb /45 kg
Length	21 in. / 53 cm
Width	19 in. / 48 cm
Height	20 in. / 51 cm
Required Input	16-35 gpm / 60-132 lpm
Output	8 gpm / 30 lpm